5-Axis CNC Machining Center M2-5AX

Hwacheon M2-5AX can work on a complex workpiece which requires many different production processes with just a single setting. The cutting mode optimization system allows you to choose a processing strategy and achieve a reduction in the work cycle time for a part and, in some cases, reduce costs in terms of the number of purchased tools. A two-axis rotary table with a diameter of 500 mm will allow processing with any combination of coordinates.

• Highly efficient multi-axis machining. Thanks to the tilt-rotary table, it becomes possible to process complex workpieces from one setup, to process grooves and other surfaces that are difficult or impossible to implement with conventional equipment. In addition, the processing time of complex curved trajectories with a spherical cutter is reduced by up to five times. Another advantage of the five-axis system is that machining can be done not only with the end part, but also with the side generatrices, which extends tool life and reduces the number of passes.
• High rigidity portal structure. The design of the frame consists of two wide supports along which a traverse moves, equipped with a feed drive with a movable portal. Thus, the high rigidity of the AIDS system is ensured.
• Oil-jet Cooling System. The jet of oil is injected directly onto the spindle bearing for effective cooling, and the motor and the spindle assembly are jacket-cooled to limit the displacement caused by heat.