Need consultation? +86 18118422417

Conventional lathe

CW62110 | SMTCL

Series: CW62B/C

Conventional lathe

Max. swing diameter over bed 1100mm
Spindle speeds range 4.8rpm — 640rpm
Max. swing over cross slide: 800mm
Max. swing in gap 1300mm
Length of gap 310mm

Options for systems and parts

Spindle bore diameter:
104mm
130mm
Distance between centers:
1500mm
3000mm
4000mm
5000mm
Spindle motor power:
11kW
15kW

Price and terms

Price on request

Get Offer
* Price is based in standard configuration of machine. Click here for choosing configurations of systems and components.

Technical data

Capability
Click to select configuration:
Distance between centers
1500mm
3000mm
4000mm
5000mm
Max. swing diameter over bed
1100mm
Max. swing over cross slide:
800mm
Max. swing in gap
1300mm
Length of gap
310mm
Lathe bed width
600mm
Max. weight of workpiece
2500kg
Headstock
Click to select configuration:
Spindle motor power
11kW
15kW
Click to select configuration:
Spindle taper
Metric #120
Metric #140
Spindle bore diameter
104mm
130mm
Spindle speeds range
4.8rpm — 640rpm
Spindle speed ranges
18pcs
Lathe Spindle Nose
D11
Feeds
Range of longitudinal feeds
0.05mm/r — 24.3mm/r — 64pcs
Range of cross feeds
0.05mm/r — 24.3mm/r — 32pcs
Rapid traverse
4000mm/min / 4000mm/min
Power of rapid feed motors
1.1kW
Threading range
Number of metric threads
50pcs
Range of metric threads
1mm — 240mm
Number of inch threads
26pcs
Range of inch threads
14T.P.I. — 1T.P.I.
Number of module threads
52pcs
Range of modular threads cutting
0.5module — 120module
Number of pitch threads
24pcs
Range of pitch threads
28D.P. — 1D.P.
Carriage
Top slide travel
200mm
Max. cross travel of lower slide
500mm
Tailstock
Max. travel of tailstock quill
250mm
Taper of tailstock sleeve
MT5
Cutting fluid
Power of coolant pump motor
0.12kW
Engines and power supply
Voltage
380V / 50Hz
*Specifications are subject to change without notice.

Common horizontal lathe with GAP CW62110 (CW series).

 

All lathes of CW series have double-layer box rib plates on both sides and inside of the bed, raising integral rigidity by one-third as compared to the single-layer box-type plates. This series is suitable for turning hight rigidity parts made of cast irons, steels and different non-ferrous metals.

 

Features:

  • Rapid design in apron, single handle operation;
  • Spindle forward, reverse running and break all use hydraulic control;
  • Manual brake, foot brake as optional;
  • Stable precision, strong cutting;
  • Use TSF anti-friction layer, flexible movement and long life;
  • Tailstock is equipped with dial and scales for direct reading;
  • Cooling uses water-electricity separate, safe and good-looking;
  • Proper to machining iron casting, steel and various nonferrous metal;
  • Larger spindle bore and pipe threading machine available.