DMTG

Turning center DL-25M

Series DL-M

Max. swing diameter over bed 520mm

Max. swing over cross slide: 310mm

Main Configuration

CNC

Fanuc 0i-TF Plus

SINUMERIK 828

Processing length

1000mm

1500mm

Specifications

Basic feauturies

CNC lathe type Slant-bed CNC lathe / 45°

X/Y guideways type

Box guideway

Linear guidway

Z-axis guideway type

Box guideway

Linear guidway

CNC

Fanuc 0i-TF Plus

SINUMERIK 828

Capability

Max. swing diameter over bed 520mm

Max. swing over cross slide: 310mm

Distance between centers

1000mm

1500mm

Processing length

1000mm

1500mm

Main spindle

Spindle speeds range 35rpm — 3500rpm

Lathe Spindle Nose A2-8

Spindle bore diameter 87mm

Bar Size 74mm

Spindle motor power 15kW / 18.5kW

Feeds

X-Axis travel 260mm

X-axis transmission type Ball screw / Ø 32mm

Z-axis transmission type Ball screw / Ø 40mm

Z-Axis travel

1040mm

1600mm

Rapid traverse

12000mm/min / 12000mm/min

24000mm/min / 16000mm/min

Positioning accuracy

0.011mm / 0.018mm

0.011mm / 0.021mm

Repeatability accuracy

0.004mm / 0.007mm

0.004mm / 0.009mm

Carriage

Tool post Lathe turret

Tool сhanging time (Adjacent/Farthest) 0.35sec. / 1.6sec.

Tools

Tooling Static tooling

Tools quantity 12pcs

Tool shank 25mm x 25mm

Tool shank diameter 40mm

Tailstock

Tailstock Hydraulic

Max. travel of tailstock quill 139mm

Tailstock quill diameter 100mm

Morse cone MT5

Lathe Center Dead center

Tailstock stroke

900mm

1250mm

Cutting fluid

Tank capacity 500L

Power of coolant pump motor 0.37kW

Engines and power supply

Voltage 380V / 50Hz / Three phase / AC

Lubrication system

Lubrication system Full-automatic

Oil tank capacity 1.8L

Lubricatingoil pump power 0.004kW

Required oil #T68 / Guide rail oil

Hydraulic system

Motor power of hydraulic station 1.5kW

Hydraulic Tank Capacity 30L

Max. pump pressure 4MPa

Required oil #32 / Hydraulic oil

Peripherals

Tool breakage detection system

Tool measuring system

TS27R

Equipment

Description

DL-25M Turning Center

The DL-25M is a turning center with two axes and a semi-closed loop system. The machine's bed is made of cast iron with 45° slanted guides, providing high rigidity. It is controlled by the FANUC 0i-TF PLUS system (Siemens 828D optional) and equipped with an asynchronous servo motor with a power of 15/18,5 kW. The machine is capable of performing turning, drilling, and milling operations on parts with diameters up to 310 mm (axial) and 520 mm (disc-shaped).

Key Features:

Automatic lubrication of guides and ball screws, chip removal system, and forced cooling.
Maximum spindle speed — 3500 rpm.
Fast movement along the X/Z axes — 12 m/min.

Construction:

Spacious working area for special equipment installation.
Rigid cast iron bed and vibration-resistant construction.
High-speed spindle with NSK bearings.
Accurate and fast movement system with ball screws.
Hydraulic tailstock.
Fully enclosed working area.
Operator control panel located on the right side.

Products in This Series

Compare Series Products

DMTG DL-M