Hydraulic injection molding machines Series F9 by SONLY
Hydraulic injection molding machines Series F9 by SONLY include models U110TSF9, U180TSF9, U230TSF9—reliable and high-precision equipment engineered to efficiently handle both small-batch and mass production tasks. All models share a modern control system, robust construction, and a high degree of automation, while differing in specifications, configuration, peripherals, and optional equipment.
Use the table below to quickly compare key specifications and select the machine that best fits your production requirements.
Specifications
Basic feauturies
Machine drive
Servo-Hydraulic (Hybrid)
Clamping mechanism
Toggle system
Injection Unit
Screw diameter
32mm
Screw ratio
24.1L/D
Max. rotational speed
270rpm
Theoretical shot volume
134.2cm³
Injection pressure
222.1MPa
Injection weight
122.2g / 4.3oz
Linear injection rate
140mm/s
Clamping unit
Clamping force
1100kN
Clamping stroke
325mm
Thickness of mould
120mm / 360mm
Space between tie bars
405mm x 360mm
Ejector stroke
100mm
Ejector force
41kN
Other
Die Hole Diameter
125mm
Motor power
15kW
Max. pump pressure
17.5MPa
Heating power
10kW
Oil tank capacity
125L
Overall dimensions and weight
Weight
3100kg
Overall length
4200mm
Overall width
1110mm
Overall height
1830mm
Specifications
Basic feauturies
Machine drive
Servo-Hydraulic (Hybrid)
Clamping mechanism
Toggle system
Injection Unit
Screw diameter
40mm
Screw ratio
24.8L/D
Max. rotational speed
250rpm
Theoretical shot volume
314cm³
Injection pressure
210MPa
Injection weight
285.7g / 10oz
Linear injection rate
180mm/s
Clamping unit
Clamping force
1800kN
Clamping stroke
430mm
Thickness of mould
170mm / 500mm
Space between tie bars
510mm x 467mm
Ejector stroke
130mm
Ejector force
41kN
Other
Die Hole Diameter
160mm
Motor power
37kW
Max. pump pressure
17.5MPa
Heating power
13.2kW
Oil tank capacity
210L
Overall dimensions and weight
Weight
3700kg
Overall length
5200mm
Overall width
1260mm
Overall height
2030mm
Specifications
Basic feauturies
Machine drive
Servo-Hydraulic (Hybrid)
Clamping mechanism
Toggle system
Injection Unit
Screw diameter
45mm
Screw ratio
24.4L/D
Max. rotational speed
230rpm
Theoretical shot volume
468.2cm³
Injection pressure
226.8MPa
Injection weight
425.7g / 15oz
Linear injection rate
140mm/s
Clamping unit
Clamping force
2300kN
Clamping stroke
520mm
Thickness of mould
20mm / 530mm
Space between tie bars
565mm x 520mm
Ejector stroke
150mm
Ejector force
77kN
Other
Die Hole Diameter
160mm
Motor power
37kW
Max. pump pressure
17.5MPa
Heating power
16.3kW
Oil tank capacity
230L
Overall dimensions and weight
Weight
3700kg
Overall length
5900mm
Overall width
1360mm
Overall height
2150mm