Conventional lathes

Conventional lathes Series C by KAIDA

Conventional lathes Series C by KAIDA include models C6140ZK, C6277C - reliable and high-precision equipment engineered to efficiently handle both small-batch and mass production tasks. All models share a modern control system, robust construction, and a high degree of automation, while differing in specifications, configuration, peripherals, and optional equipment.

Brand
KAIDA
Models in series
2 models
Price
Price on Request
Model range

Models in this series

Compare specifications
Comparison

Specification comparison

Use the table below to quickly compare key specifications and select the machine that best fits your production requirements.

Showing 33 of 33 specifications
Specification comparison table: Conventional lathes Series C by KAIDA
Specification Manual lathe C6140ZK KAIDA Model: C6140ZK Price on Request Manual Lathe C6277C KAIDA Model: C6277C Price on Request
Capability
Distance between centers 750mm 1000mm
Processing length 650mm -
Max. swing diameter over bed 400mm 770mm
Max. swing over cross slide: 255mm 520mm
Lathe bed width 312mm 405mm
Max. swing in gap - 970mm
Headstock
Spindle speeds range 40rpm — 1800rpm 36rpm — 1600rpm
Spindle speed steps ranges 12pcs / 12pcs 12pcs
Spindle taper MT6 -
Lathe Spindle Nose D6 D8
Spindle bore diameter 52mm 105mm
Spindle motor power 4kW / 5.5kW 7.5kW
Feeds
Range of longitudinal feeds 0.04mm/r — 2.46mm/r 0.063mm/r — 2.52mm/r
Range of cross feeds 0.03mm/r — 1.23mm/r 0.027mm/r — 1.07mm/r
Rapid traverse - 4500mm/min / 1900mm/min
Threading range
Number of metric threads 24pcs 22pcs
Range of metric threads 0.5mm — 20mm 1mm — 14mm
Number of inch threads 61pcs 26pcs
Range of inch threads 72T.P.I. — 1 5/8T.P.I. 2T.P.I. — 28T.P.I.
Number of module threads 20pcs 18pcs
Range of modular threads cutting 0.25module — 10module 0.5module — 7module
Number of pitch threads 45pcs 24pcs
Range of pitch threads 96D.P. — 3 1/4D.P. 56D.P. — 4D.P.
Carriage
Tool shank 20mm x 20mm 25mm x 25mm
Top slide travel - 145mm
Max. cross travel of lower slide - 360mm
Tailstock
Max. travel of tailstock quill 120mm 150mm
Tailstock quill diameter 60mm 75mm
Taper MT4 MT5
Cutting fluid
Power of coolant pump motor 0.04kW -
Engines and power supply
Voltage 380V / 50Hz 380V / 50Hz
Lathe chuck
Chuck - 3-jaw chuck / 4-jaws chuck
Clamping type - Mechanical

The table scrolls horizontally; the specification names and the header stay fixed.

Catalogue

Browse the whole category

Other series and models in “Conventional lathes” - with prices, specifications and delivery terms.

Back to category