Manual Lathe C6277C
Main Configuration
Price & Terms
Specifications
KAIDA C6277CCapability
- Max. swing diameter over bed
- 770mm
- Max. swing over cross slide:
- 520mm
- Max. swing in gap
- 970mm
- Lathe bed width
- 405mm
Headstock
- Spindle speeds range
- 36rpm — 1600rpm
- Spindle speed steps ranges
- 12pcs
- Lathe Spindle Nose
- D8
- Spindle bore diameter
- 105mm
- Spindle motor power
- 7.5kW
Lathe chuck
- Chuck
- 3-jaw chuck / 4-jaws chuck
- Clamping type
- Mechanical
Feeds
- Range of longitudinal feeds
- 0.063mm/r — 2.52mm/r
- Range of cross feeds
- 0.027mm/r — 1.07mm/r
- Rapid traverse
- 4500mm/min / 1900mm/min
Threading range
- Number of metric threads
- 22pcs
- Range of metric threads
- 1mm — 14mm
- Number of inch threads
- 26pcs
- Range of inch threads
- 2T.P.I. — 28T.P.I.
- Number of module threads
- 18pcs
- Range of modular threads cutting
- 0.5module — 7module
- Number of pitch threads
- 24pcs
- Range of pitch threads
- 56D.P. — 4D.P.
Carriage
- Top slide travel
- 145mm
- Max. cross travel of lower slide
- 360mm
- Tool shank
- 25mm x 25mm
Tailstock
- Max. travel of tailstock quill
- 150mm
- Tailstock quill diameter
- 75mm
- Taper
- MT5
Engines and power supply
- Voltage
- 380V / 50Hz
Peripherals
Digital Readout Unit (DRO)
Equipment
Description
Key Advantages of the C6277C Universal Lathe:
Increased Swing Diameter Over the Bed
This model belongs to the heavy-duty universal lathe class with a swing diameter of 770 mm over the bed. This enables installation and machining of large-scale workpieces that cannot be accommodated on smaller-class lathes.
Electromagnetic Spindle Brake
The lathe is equipped with an electromagnetic braking system for the main drive. This ensures rapid spindle stoppage after the motor is switched off, enhancing operator safety and reducing auxiliary time during tool changes.
Forced Lubrication System for the Headstock
Unlike smaller models that often rely on splash lubrication, the C6277C features a pump-driven forced lubrication system for spindle gears and bearings. This guarantees stable component operation under high loads and extends the service life of mechanisms.
Reinforced Bed Construction
The wide bed with increased guideway spacing provides enhanced stability when turning large-diameter parts. The massive construction effectively dampens vibrations generated during interrupted cutting of hard materials.
High Torque Main Drive
The installed high-power electric motor enables heavy stock removal during roughing of large forgings and shafts without risk of drive overload.
Enlarged Spindle Bore
The spindle through-hole diameter exceeds 100 mm, allowing long bar workpieces of large cross-section to pass through and enabling the use of heavy-duty tooling accessories.